AKAI Rear Projection 55" Big Screen TV model PT5598HDI HELP!

7 posts / 0 new
Last post
Spikeroo
AKAI Rear Projection 55" Big Screen TV model PT5598HDI HELP!

Hey Guys, I Bought an AKAI Rear Projection 55" Big Screen TV model PT5598HDI and it worked for a while, until one night I turned the TV off for bed, and the next morning I am stunned to find that my TV has a big bow on the top and bottom, the color is off as well, Here is a pic of what I'm talking about.

pic

Meltexas
Meltexas I ahve the same

Meltexas I ahve the same problem I have tried to contact Samsung, Akai, and have reviewed previous post on this same issue. Mine lasted almost four years. I'll try to keep you posted if I find the solution.

conspiracychic
same gig here. I guess I

same gig here. I guess I should be fortunate cuz I bought it in July 2004. It's March 2009 and for my lucky St. Patty's Day I get the bow and colorized WTF. The TV has been babied in an entertainment cabinet I customized just for my big screen baby...but for this to happen out of the blue just really sucks. American Idol has started back again and I really want to watch Adam Lambert. I think Circuit City where I bought it went outta biz. I had the extended warranty that xpired like July 2008~so this is really sucking right now. Would America PLEASE bring quality work back home! I'd like to know my $1,500 will last at least 8-10 years without the annoyance of repairs/replacement/shopping.
Ugh...Life.

Roadglide
I had the exact same

I had the exact same malfunction occure lastweek. Was working fine....turned it off. The next morning I turned the 65 inche on and found the convergence was off and the picture bowed at top and bottom....1,700.00 bucks gone if I can't locate a repair. Bought 6 yrs ago!!!

goldwinging99
My akai pt5598hdi has lost

My akai pt5598hdi has lost all video, but the sound is fine. HELP!!

Sophm
Im not a repair tech, but it

Im not a repair tech, but it sounds like the Convergence IC's are bad.

 

This might have some info that can help. Link

evil
there should be a seperate pc

there should be a seperate pc board for the convergence hanging on the chasis of the set,there should be two large black chips that have STK 392-xxx 040 or 010 unplug all wires from it and see if you get any video from the tv then if you do get any colors replace these chips.

 

Connect With Techlore