Sony Projection TV

3 posts / 0 new
Last post
dawgpound
Sony Projection TV

Since I move to my new house my Sony TV model KP-65WV600 start showing a ghost shadow right after my extend warranty was expired and I have been watching that TV with a ghost shadow almost a year and I desire to call a TV service company to fix it. when a serviceman show up, he said the TV need a convergence to be adjust and the TV get back to where it should be, ten days later the went dead and I call the company again and they came out and check the TV and he said that the power supply is dead and he pull out the power board to his shop and fix it, and then I watch the TV for three hours later I see red horizontal hatch with blue cross hatch and about five minutes later I heard a sound pop inside the TV and the power went on the standby mode with four blinking red light on the standby button. what is the a serviceman did wrong to my TV? and I help, Please!

zapdbf
Four blinks is a vertical

Four blinks is a vertical deflection error. I don't want to speculate on what someone else did, i am not there. Everything you have described can be localized to "D" Board. If you are having this much trouble with this board, maby you should get a new "D" board. I am not sure if sony has them anymore , but i would try PTS.  The tv should still be under shop warranty if this was a recent repair, i would go back on the service company to get it fixed.

A-TRAIN
sony wega 57" projection tv m

sony wega 57" projection tv m# kdp57ws655 when power is turned on i get no picture and 10 blinks on control pannel removed back wood pannel and checked all conectors made sure that they are tight but did no good also noticed that the tubes glow for a second then i hear a click and the tubes shut off please advise

 

Connect With Techlore