I JUST RECIEVED A REPAIRED AND TESTED D BOARD FROM SONY[A1302180A] AND STILL HAVE BOWTIE EFFECT. CONV. ICS DO NOT HEAT UP. ANYTHING ELSE TO LOOK FOR?
Fuses on "G" board are probibly blown, due to the bad convergence ic's on the "D" board.
they are yellow and look like a resistor, there are two of them and they will be close to the connecter that goes to "D" board
Custom Development Magenium Solutions
Copyright © 2020
MyOpenRouter
Media Smart Home
Magenium Solutions
EHome Design
See all...
Fuses on "G" board are probibly blown, due to the bad convergence ic's on the "D" board.
they are yellow and look like a resistor, there are two of them and they will be close to the connecter that goes to "D" board