I took measurements of the IC Drivers Amp TDA6107G ,
Unplugged the CRT board from the neck of the tube, turned on set. This were the measurements Pin #1=1.6v,2=1.5v,3=1.5,4=0.00,
5=5.00v,6=193v,7=160v,8=160v,9=154v,
Now plugged in the CRT board in the neck of the tube, turned on set. P#1=1.9v,2=2.3v,3=1.7v,4=0.00v,5=5.00v,6=192v,7=150v,8=119v,
9=139v,all this was taken from the hit sink G. and with no RF connection
