I have a RCA CTC 113AA, F20TF20
I need to adjust grey scale in service menu, I can get in , has some one the manual and give me please at least what are this.
6 = 7= 8= 9= 10= 11= 12= 13=
I don't have the service manual for that one readily availble at this time. I'll try and get it though. Since my main specialty is audio products and camcorders (vcrs too), I don't save the TV stuff locally.
Thanks Larry, this confusion happens to me many times,i had it right on paper, but when i wrote it here, i wrote it wrong, maybe because i'm used to the CTC 's which i like better then some RCA crap they make now like the ATC's. I think my problem here is the flyback, because when i adjust g2 low bright the way i like it kind change the convergence grey scale , and when i turn on ,the screen takes 3 or 4 seconds to bright the pic up, i have to keep g2 adjusted a litle bit too higher for my test,
Sure you got the right chassis number my freind, as this is an old set if it is. Is it a 200 chassis seires?
Please post the model number and full chassis number. Any details you can provide will allow us to get you more detailed responses.
Dan
Ok.. I found out a little more info here. The chassis number is ATC113. The unit was made sometime in 2003. I should be able to get the service info.
Oh thats differant then! An ATC chassis. Not CTC.
Thank you Larry, your're right my mistake , the chassi is ATC113AA1,RCA.
Thank you Larry, your're right my mistake , the chassi is ATC113AA1,RCA.
dans the man, he found the right model number.
I don't have the service manual for that one readily availble at this time. I'll try and get it though. Since my main specialty is audio products and camcorders (vcrs too), I don't save the TV stuff locally.
Thanks Larry, this confusion happens to me many times,i had it right on paper, but when i wrote it here, i wrote it wrong, maybe because i'm used to the CTC 's which i like better then some RCA crap they make now like the ATC's. I think my problem here is the flyback, because when i adjust g2 low bright the way i like it kind change the convergence grey scale , and when i turn on ,the screen takes 3 or 4 seconds to bright the pic up, i have to keep g2 adjusted a litle bit too higher for my test,
I would check the regulator for ripple in the main power supply.