Mitsubishi ws-55813 No video inputs are working.

5 posts / 0 new
Last post
entreri
Mitsubishi ws-55813 No video inputs are working.

Replaced 4 bad caps on Dm module.  OSD works fine but no video inputs are working.  When I select DTV or try to use the memory card ports the screen scrambles.  Im thinking its the doubler but any other ideas would be helpful.

entreri
So i checkedĀ 3 pin BA09FP

So i checked 3 pin BA09FP voltage regulator, In position IC9C25  while tv is powered on  pin 1 reads 12 v, pin 3 is around 12v.  This regulator is obvioulsy bad as its putting out more than 9v.  If I replace it will I have to replace any other parts?

entreri
Fixed my own problem. It was

Fixed my own problem. It was the voltage regulator. Part was $1.20 plus $5 shipping. So a $6 fix. This applies to models: ws-48513, ws-48613, ws-55513, ws-55613, ws-55813, ws-65513, ws-65613, ws-65713, ws-65813, ws-73513, ws-73713 with v23 Chassis

mooserklein
I'm having the same issue on

I'm having the same issue on a ws-73713. Where would I find the voltage regulator?

Thanks!

quick_draw_mcGraw
Can you post pictures or

Can you post pictures or steps to located the 9v regulator. I'm having the same problem and would like to fix it.

 

Connect With Techlore