NEED YOUR HELP LARRY DILLON, SAW IN PAST YOU HAVE A LINK AVAILABLE FOR SERVICE MANUAL HAVE A CONVERGENCE PROBLEM WITH MY SONY MODEL #KP51WS510 NEED LOCATION OF THE BOARD WHERE IC CHIPS ARE CANNOT FIND #STK392-560-E. THANKS
They are located on "D" board, you can't see them from the back, they are mounted on huge heat sinks, right in front of you when you look in the back, the ic's themselfs are pointed away so you can't read them. But the heatsink is easy to see.
When doing this repair, Check for open fuses on "G" board, this board is usually mounted vertically to the left of "D" board. they look like resistors and are yellow in color.
larry i need to know what pico fuse to replace is it ps 8006 the one by itself i only got 2 pico fuses one for each side fir the ic s don t know witch fuse to replace on kp51ws510 sony they did not give me anything that tells me wich one i know their is 3 pico fuses on each side but they only gave 2one for each side so if you could let me know witch one i have to do [email protected]
Larry, I'm trying to use the convergence procedure for Sony KP-51WS510, if there is any further information you can provide me please send it to [email protected]. My picture is similar to kailani (their post was from December 9, 2008)
They are located on "D" board, you can't see them from the back, they are mounted on huge heat sinks, right in front of you when you look in the back, the ic's themselfs are pointed away so you can't read them. But the heatsink is easy to see.
When doing this repair, Check for open fuses on "G" board, this board is usually mounted vertically to the left of "D" board. they look like resistors and are yellow in color.
Open Fuses?? How do you know when they are open. Are these the Pico fuses your talking about?
Open Fuses?? How do you know when they are open. Are these the Pico fuses your talking about?
larry i need to know what pico fuse to replace is it ps 8006 the one by itself i only got 2 pico fuses one for each side fir the ic s don t know witch fuse to replace on kp51ws510 sony they did not give me anything that tells me wich one i know their is 3 pico fuses on each side but they only gave 2one for each side so if you could let me know witch one i have to do [email protected]
Larry, I'm trying to use the convergence procedure for Sony KP-51WS510, if there is any further information you can provide me please send it to [email protected]. My picture is similar to kailani (their post was from December 9, 2008)