I have a copy of the KP53HS10, same chassis just differant size screen, board should be the same. I will e-mail you a copy if you post your e-mail address, but you will need to go to pando.com and get that extraction program as this file is too big to send through my mail server and pando is free. Good Luck and let us know what the symtom was and how you fixed your set.
Hi Larry, I could use the scematic for the KP 53HS10 myself. Got this as a feebe
and I turned the red screen voltage down and poof, it worked great. Now I need all the explanations of the service mode tecnobable SONY uses for the values for proper adjustment/set-up. This set in 1080i mode will turn everything to 1 16x9 mode, regardless of what it is. In 4:3 in the 480p/i modes, it is fine. Is there any way around this not displaying a full picture in 1080i mode?
I have a copy of the KP53HS10, same chassis just differant size screen, board should be the same. I will e-mail you a copy if you post your e-mail address, but you will need to go to pando.com and get that extraction program as this file is too big to send through my mail server and pando is free. Good Luck and let us know what the symtom was and how you fixed your set.
Hi Larry, I could use the scematic for the KP 53HS10 myself. Got this as a feebe
and I turned the red screen voltage down and poof, it worked great. Now I need all the explanations of the service mode tecnobable SONY uses for the values for proper adjustment/set-up. This set in 1080i mode will turn everything to 1 16x9 mode, regardless of what it is. In 4:3 in the 480p/i modes, it is fine. Is there any way around this not displaying a full picture in 1080i mode?