I have the WS-65513 and replace the caps on the DM board, 2 were bad and reseated the board (out of the shell so it would seat properly) and now I have no blinking lights and no power. Could it be that the mail power board is no gone? If so, does anyone know the part # and cost of this board?
FXWG said: About a year ago I had the same problem with it constantly blinking. had it repaired for $900.Yesterday the tv won't come on,unplugged and replugged got the blinking light for a min.but no power.Tried several times with same results.Left it unplugged over night and this morning it worked, turned it off ,wouldn't come back on.I was wondering if I mite get a copy of the removal proceeder.I think I'll order the caps just in case [email protected]
(mitsubishi 65613)Larry thanks .I receaved the info. and removed the DM . The caps did not look puffy but I ordered caps from Mouser and had it sent next day. Caps .24 shipping 29.00 Took about one hour to replace and reinstall. Turned on and off several times and KNOCK ON WOOD it's still working. One more request, please email me info. on how to make a donation with paypay [email protected]
(mitsubishi 65613)well I guess I should have really knocked on wood.worked great last night with HD antenna but would not come on with remote this morning.When powered on from tv it steadlly went through all the channels and wouldn't stop.Any ideals.could really use the help.
Same problem mitsubishi ws65711 would not turn on error code with device and menu button read 22 could you please send me info on how to replace the fuses and the IC convergence.
ws-65513) I repaired this set in Feb 2008 . It worked fine untill recently. When I turned it on there were horizontal green lines on the screen. Now the screen is blank but the green power light is on and I can pull up the main menu.I have tried the reset button. I hooked up a dvd player to no avail. I even tried connecting Dishnet with RCA cables to video input on back. When i replaced the caps in february i did not replace the IC convergance or any of the fuses. I pulled the DM board out and examined the caps and they look fine. Is there something else I could try. This has taken the family out of the familyroom.lol [email protected]Thanks
Larry Dillon said: try resetting again and make sure none of the front switches on the front of th drt re not sticking. common problem man
Uplugged tv and pressed all buttons on tv repeatedly then plugged back in. Turned on tv with remote and acted normal.Left it on for about an hour then turn it off then on after 30 min.Turned it back on this afternoon been watching it all night .Real test will be in the morning.Thanks Larry,hope your feeling better
Hello Larry, hope you feel better soon! You will be in our prayers! Sorry to ask for your help, but you seem to be "the guy" to ask. Still have a broken TV, and our son is taking his flat screen back to school Monday (we've been limping along on his). Anyway, it's a Mitsubishi with the blinking green light? HELP! Thanks!
You are a very valuable person when it comes to this problem.
I have the exact same problem with my Mitsubishi 65" projection screen as Winslow has. I had a repair man come by and he said that my DM module and power supply is no good and that he needs to take it to his shop to fix it for about $750. I would like to know what I can do it for myself and would appreciate it if you could send me the directions on how to fix it. My email address is [email protected]
I had the same problem and found 2 of the caps to be dead so I replaced all and now I don't get the blinking light, I don't get any light. Can you help me out ? WS-65513 [email protected]
Hi, Larry....I'm in the same boat as many others. Mitsubishi WS-55613 with the blinking green light. I would really be grateful if you would send me directions for trying to repair this myself....I have some soldering skills, and I think I could make it work.
My WS-65809 wouldn't power up. A few days later, it did, but now it's giving me a distorted picture both with cable and DVD.
My self-diagnosis feature shows two blinking lights... pause... then one blinking light.
Am I having the same problem as everyone else on this board? I have a friend who is an avionics engineer for a major airline who has offered to help me fix it. I'd appreciate any instructions if you can email them directly to me at [email protected]
I went 'round and 'round with The company I purchased the set from (Tweeter).
The Chicago office was very helpful, and assured that my extended warranty was still in effect--having been purchased four years ago.
After speaking with the repair service, the insurance carrier, and a service technician in my region-- I left town on business and came back a few days later to find I had left the set plugged in, and the green light was not flashing.
It powered-up normally.
After unplugging it and plugging it back in, the light started flashing again and none of the standard fixes did anything.
These included: Resetting, menu/device press for 8-10 seconds.
Simply leaving it plugged in and going away for a couple of hours resulted in normal operation when I tried to power it up again.
My theory is that the set is controlled by a computer with hard-wired self diagnostic programming included. Whenever it sees a low or no voltage situation, it goes into the self-diagnostic cycle, which can take a long time to finish... as is the case with my Dell Axim pocket PC.
My mistake was unplugging the set when it appeared to me that the it suffered an electrical insult-- and did not give it enough time to self-reset.
I hope this helps someone-- and apologize if this information is too trite and simple-minded for the problems others of you face.
I have the WS-65513 and replace the caps on the DM board, 2 were bad and reseated the board (out of the shell so it would seat properly) and now I have no blinking lights and no power. Could it be that the mail power board is no gone? If so, does anyone know the part # and cost of this board?
(mitsubishi 65613)Larry thanks .I receaved the info. and removed the DM . The caps did not look puffy but I ordered caps from Mouser and had it sent next day. Caps .24 shipping 29.00 Took about one hour to replace and reinstall. Turned on and off several times and KNOCK ON WOOD it's still working. One more request, please email me info. on how to make a donation with paypay [email protected]
Could you please send the instructions to [email protected]. I have the same issue.
I would very much appreciate a copy of the instructions as well. My email is [email protected].
I have a WS55615.
Thank you very much!
Larry, I would love it if you sent me those fix it instructions. I have a repair guy coming over today. I hope you get this soon enough.
Thanks, Bill
[email protected]
Larry, I guess you might need my Model number. ws-55615
thanks
(mitsubishi 65613)well I guess I should have really knocked on wood.worked great last night with HD antenna but would not come on with remote this morning.When powered on from tv it steadlly went through all the channels and wouldn't stop.Any ideals.could really use the help.
try resetting again and make sure none of the front switches on the front of th drt re not sticking. common problem man
Same problem mitsubishi ws65711 would not turn on error code with device and menu button read 22 could you please send me info on how to replace the fuses and the IC convergence.
[email protected]
HI LARRY,
I TOO HAVE THE DREADED BLINKING GREEN LIGHT, WITH NO PICTURE. I HAVE MODEL # WS65513
COULD YOU PLEASE EMAIL ME THE FIX FOR THIS PROBLEM. MY EMAIL IS [email protected]
ws-65513) I repaired this set in Feb 2008 . It worked fine untill recently. When I turned it on there were horizontal green lines on the screen. Now the screen is blank but the green power light is on and I can pull up the main menu.I have tried the reset button. I hooked up a dvd player to no avail. I even tried connecting Dishnet with RCA cables to video input on back. When i replaced the caps in february i did not replace the IC convergance or any of the fuses. I pulled the DM board out and examined the caps and they look fine. Is there something else I could try. This has taken the family out of the familyroom.lol [email protected]Thanks
Uplugged tv and pressed all buttons on tv repeatedly then plugged back in. Turned on tv with remote and acted normal.Left it on for about an hour then turn it off then on after 30 min.Turned it back on this afternoon been watching it all night
.Real test will be in the morning.Thanks Larry,hope your feeling better
great news man!, with the rsdiationtreatments and the chemo, I feel like dirt.but thanks for sasking. :>)
Hello Larry, hope you feel better soon! You will be in our prayers! Sorry to ask for your help, but you seem to be "the guy" to ask. Still have a broken TV, and our son is taking his flat screen back to school Monday (we've been limping along on his). Anyway, it's a Mitsubishi with the blinking green light? HELP! Thanks!
wherer am i supppose to send it to!!??myAND Model Number? magic lamp is broken today
Larry,
You are a very valuable person when it comes to this problem.
I have the exact same problem with my Mitsubishi 65" projection screen as Winslow has. I had a repair man come by and he said that my DM module and power supply is no good and that he needs to take it to his shop to fix it for about $750. I would like to know what I can do it for myself and would appreciate it if you could send me the directions on how to fix it. My email address is [email protected]
Thanks
I had the same problem and found 2 of the caps to be dead so I replaced all and now I don't get the blinking light, I don't get any light. Can you help me out ? WS-65513 [email protected]
Hello Larry, can you please email me the fix for the Mitsubishi WS-65513? I am having the same problem everyone else is. Thank You [email protected]
Oopps! Forgot my email address Larry... please send the info to [email protected]. Thanks a bunch!!
Larry, same problem with the light. Could you please send instructions to [email protected]?
Thanks much
Hello Again Larry....
our model number is WS 55511 with the blinking green light. My email is [email protected], thanks in advance for your help!!
same problem, blinking green light, please send instructions to [email protected] tanks
Hello Larry...
Same issue... Blinking Green Light... Model WD 52825
Thank you in advance... You provide a valuable service here.
bob at intelligenthouse dot com
bbobo
Hi, Larry....I'm in the same boat as many others. Mitsubishi WS-55613 with the blinking green light. I would really be grateful if you would send me directions for trying to repair this myself....I have some soldering skills, and I think I could make it work.
Thanks in advance for your help!
[email protected]
Hi Larry,
My WS-65809 wouldn't power up. A few days later, it did, but now it's giving me a distorted picture both with cable and DVD.
My self-diagnosis feature shows two blinking lights... pause... then one blinking light.
Am I having the same problem as everyone else on this board? I have a friend who is an avionics engineer for a major airline who has offered to help me fix it. I'd appreciate any instructions if you can email them directly to me at [email protected]
Thanks!
Hi larry
was wondering if you forward the info i need to fix my WD-62825? If your working on it or just cant help me with my problem, just let me know.
Thanks again.
Got the blinking light. Can you send the instructions to [email protected]? thanks a lot!
I am having the same problem PLEASE send me info that will help me in getting my tv back. Thanks for your help in advance.
Sorry I forgto my Email is [email protected]
I went 'round and 'round with The company I purchased the set from (Tweeter).
The Chicago office was very helpful, and assured that my extended warranty was still in effect--having been purchased four years ago.
After speaking with the repair service, the insurance carrier, and a service technician in my region-- I left town on business and came back a few days later to find I had left the set plugged in, and the green light was not flashing.
It powered-up normally.
After unplugging it and plugging it back in, the light started flashing again and none of the standard fixes did anything.
These included: Resetting, menu/device press for 8-10 seconds.
Simply leaving it plugged in and going away for a couple of hours resulted in normal operation when I tried to power it up again.
My theory is that the set is controlled by a computer with hard-wired self diagnostic programming included. Whenever it sees a low or no voltage situation, it goes into the self-diagnostic cycle, which can take a long time to finish... as is the case with my Dell Axim pocket PC.
My mistake was unplugging the set when it appeared to me that the it suffered an electrical insult-- and did not give it enough time to self-reset.
I hope this helps someone-- and apologize if this information is too trite and simple-minded for the problems others of you face.
Pages