So what you are saying, you get NO picture on the screen for 10 minutes, THEN the picture is there but is going in and out of focus for a while or does the picture have a 3-D effect like if the convergence is out? The description is a little undescriptive. And what model of Sony are we talking about here. We are not fortune tellers here my friend. One more thing, PLEASE!!! Do not type in all caps. This is considered rude! Thanks.
tv comes on with audio but no picture,after 10 mins or more tv comes on out of focus after about 20 mins or so the focus becomes slowly better.then After that picture is still a little on dull side.
You have low B+ when you turn on the TV set most likely or the focus block is bad in your set. The low b+ is most likely leaky capacitors in the sweep power supply. i personally think the focus block is bad and you need to clean up the optics and adjust the set a little. How handy are you and can you follow a service manual?
IF ANYONE CAN GIVE ME ADVICE THANK YOU.
So what you are saying, you get NO picture on the screen for 10 minutes, THEN the picture is there but is going in and out of focus for a while or does the picture have a 3-D effect like if the convergence is out? The description is a little undescriptive. And what model of Sony are we talking about here. We are not fortune tellers here my friend. One more thing, PLEASE!!! Do not type in all caps. This is considered rude! Thanks.
SONY REAR PROJECTION VIDEOSCOPE KP53V45
SONY 52"VIDEOSCOPE KP53V45 TV OUT OF FOCUS ALL TIME NOT CONVER GOOD
Edward do you not know Internet etiquette? You caps man! Your caps! Look how you typed your response and look at mine, see any difference?
Yes i do thank you ,can you help me with my issue.
Yes, that is a lot better thanks. Now please describe your problem in a straight forward fashion leaving nothing to guess.
tv comes on with audio but no picture,after 10 mins or more tv comes on out of focus after about 20 mins or so the focus becomes slowly better.then After that picture is still a little on dull side.
You have low B+ when you turn on the TV set most likely or the focus block is bad in your set. The low b+ is most likely leaky capacitors in the sweep power supply. i personally think the focus block is bad and you need to clean up the optics and adjust the set a little. How handy are you and can you follow a service manual?