Phillips Magnavox picture problems

7 posts / 0 new
Last post
Jairo Parra
Phillips Magnavox picture problems

I can turn on my Phillips Magnavox tv and I can
hear the sound but no picture can be seen. What
could be wrong here?

Matt Whitlock (not verified)
The first thing I would check

The first thing I would check is the connections on the back of the set and source. If it's connected with a composite or S-video cable, it may have come loose.

Jairo Parra
No, it's not that. After

No, it's not that. After about half an hour just once today, the picture did come back but it didn't look too good. I am thinking it is the picture tube. But I could be wrong.

Matt Whitlock (not verified)
Can you be more specific

Can you be more specific about how it looked? How old is the TV?

Jairo Parra
Well, I could see the images

Well, I could see the images but not that clear and the tv is about six years old or more.

Matt Whitlock (not verified)
Provided that it is like this

Provided that it is like this for all image sources, and you checked all connections, the TV may be in need of repair. I don't have enough information to recommend you repair or replace it, but I'd at least get a quote before you make any final decisions. You can read this article for help in going through this process.

Jeremy9980
I'm having a similar problem.

I'm having a similar problem. The tv turns on fine and the sound is fine. The picture is gray with diagonal white lines, and then the tv turns off 5 seconds later. Any suggestions?

 

Connect With Techlore