Television and Home Theater

sony kdf-e55a20 flashes on for 45 seconds then of for 45 seconds and off and on etc.

I have a sony KDF-E55A20 and it will power on for about 45 seconds and then off for 45 seconds and then off and on till I turn it off. There is a  red code of 5 flashing.

Does anyone have any suggestions??????  Please HELP...................

Thanks,

Paul

mitsubishi 55859

Had a bad breaker and now the dreaded blinking green light has appeared.Does anyone

know how to fix the thing ?

WD-XX725 with solid green light

I have a WD-62725 with a problem slightly different from most postings I have seen. When I turn it on it powers up ok but automatically goes to a checkered pattern screen. the pattern has small rectangular checkers on it that alternate light blue and dark blue. I can not get any of the menus to display through the checkers. When I switch input devices it goes blank for a second and then returns to the checkered pattern. There are no error or flashing lights at all. When I hold down the menu and device buttons for a diagnostic check the code I get id 1-2......"no errors detected".

Sony Projection KP-51WS510

I had two Sony projection TV model KP-51WS510 had convergence problem.

I was replaced both IC STK 392-560 order from MCM but still had same problem.

The convergence manually not adjustable wonder is digital convergence board bad.

Is anyone experienced same simptom of this problem before.

Please let me know had any way to fix this problem.

I did check all the resistor and fuse on D-board all test ok.

The DC voltage was all normal only -22V/DC a little lower as -19V/DC.

Samsung LE52M8

Can anyone help? I bought my Samsung lcd tv ( model LE52M8 ) about 3 months ago. It recently started to make a buzzing noise when i switched it on, then today it gave 1 loud buzz and there was no picture but perfect sound. I have tried unplugging the tv for a few hours and switching on again to no avail the problem persists, anyone got an idea? HELP!!!!

Sony Projection TV KP-61V15

Greetings, I have a sony projection tv im working on i have a problem with it when you turn it on all you get is three lines horizontal on the screen reb green blue i have a blown fuse on the convergence board i changed it but i just blew again i think i need to change the STK IC's but does that control the vertical also or might it have another problem and where should i start thanks any help would be appreciated

Pages

 

Connect With Techlore