Television and Home Theater

Blue glow around images on a Philips Model# 60PP9363H/17

I recently bought a Philips Model #60PP9363H/17 for $250. I hooked it up and see a blue glow around the edges of the images, mainly around the whites.  I tried changing the color settings and adjusting the convergence, but this only helped a little. I cannot try setting the multi-point convergence because I do not have the remote yet, it is on it's way in the mail. Could it be that I need a new lamp?? Or is the convergence the problem?? I tried looking for a new bulb, but cannot seem to find out which one is the right one for this model.

Sony KP-J29MN1AK

Need your help. I am troubleshooting an issue with my Sony KV-J29MN1AK TV The TV works fine and the picture and sound are good. But there are horizontal, thin faint lines displayed over the entire screen. These lines are white and not very bright but a bit lighter. The are spread by a distance of my two fingers at the bottom and then gradually the distance gets reduced to almost less than my first finger at the top.

sony kp46wt510

 I have sony kp46wt510 when it start it blinks  4 times and the image is curved on both side vertically specially when i press menu  plus there is triple image  green bleu red .I did change a couple of pico fuses 3.15 and 5 amp on both boards G and  D plus i did change stks  and ic 8003 but the problem still there please if any one can explain to me what it is going on.

My Panasonic PT-51dx80

First colors have double color images, haven't been able to adjust them.Set 9yrs old.

Also never fooled with pip before fooled around now can't get picture back to fill

up screen. have multiple images and main image smaller with other boxes can anyone

give me advise does it pay to have fixed or not worth it??

beep codes insignia

HI FOLKS,

   SONS 2YEAR OLD INSIGNIA TV IS OUT GREEN LIGHT IS NFLASHING...

 h

HELP......

                                     THANKS,

Green Convergence Problem

Hello,

I have a Toshiba 42h82 rear screen projection tv. I have read a lot of info about the red and blue convergence issues, but mine is green. Is the fix the same as for the red / blue (ie replacing the IC's)?

Thank you in advance,

Jyoti

Pages

 

Connect With Techlore