Television and Home Theater

      hello,

      I have a sony model KP-WV65700,after I turn on the tv the screen will flash green and then will power off,I have taken off the front cover and noticed before the tv turns off the CG board is arcing by the heat cover.If I turn down the green adjustment the problem seems to get better but the picture doesnt look right.I was thinking that I might need to replace th CG board,thank you for any help.

Hello, I recently had a problem with my WS65907 powering off after a few seconds of turning it on and found it to be two blown "pico" fuses next to the regulator.  I replaced the fuses and everything worked fine for about a week then the picture started to suddenly drift to a bright whitish hue as if you turned up the brightness as far up as it would go.  It will stay like this for maybe five minutes then go back to normal again for a couple of minutes then go white again and stay like that for longer and longer.  It will toggle back and forth at intermittant t

(Larry, I couldn't reply to your PM because you disabled them. When I pressed the input and menu buttons at the same time I got the code 2 2.)

I have a WS-65711 that when I turn it on the green light stays solid for 2-3 seconds and then the TV turns off. I tried the usual simple tricks(system reset, unplugging it and waiting a day to plug it back in) but from what I've read it sounds like some capacitors blew and then the transistor blew as a result. Help me fix it!