Television and Home Theater

Mitsubishi WD-62525 Blinking Green to Red Light

Submitted by SteBix on Sun, 11/09/2008 - 13:26

Forums: 

Mr. Dillon or anyone else,

I am experiencing an issue with my Mits Wd-62525 (On start-up flahing green light to red light, 3-4 code displayed, already
replaced the lamp and still have the issue).  Would one of these kits fix the issue?  V26 DLP
FMT PWB repair Kit, V26 DLP Signal PCB Repair Kit or the Mitsubishi V26
DLP power PWB Repair Kit from
http://servicemanuals.vstore.ca/product_info.php/pName/v26-dlp-fmt-pwb-r...

mitsubishi ws-65711 will turn turn on. NO LIGTHS??

Submitted by warriorrider2005 on Sun, 11/09/2008 - 10:49

Forums: 

I have a mitsubishi ws-65711.  It will make a chirping noise (for lack of a better term) from the power supply when it is plugged in or unplugged.  There are no lights coming on and I am unable to retrieve any codes..  Nothing happens and and resets are not doing the trick.  Is this the same problem as with the blinking grean light??

 Please advise and send what ever info would be helpful!  Thanks

 

Rob

[email protected]

Akai PDP4225M

Submitted by reggie4565 on Sat, 11/08/2008 - 23:50

Forums: 

 I am having problems with my Akai Plasma. The red std/by light is on but will not turn on. I know it has something to do with the power supply board. Need schematic to properly check.Does anyone have access to Service Manual or power supply schematic (MPF7410 A)?

Sony KP46WT510 Help Please

Submitted by davedrumdude on Sat, 11/08/2008 - 19:50

Forums: 

 I have a bit of a dilema I need some help with.  The convergance ICs have 18 pins each. Alongside of these are various resistors that are bridged to different legs of the IC. Can someone tell me which legs of the ICs should be bridged to which resistors? 

If you click the link below there are some pictures of the D board.

http://www.techlore.com/forum/thread/24330/Sony-KP46WT510-Help-Please/

Problem with Sony KP-51WS500

Submitted by ThomasE on Sat, 11/08/2008 - 12:10

Forums: 

Hi Folks, I am new to this forum and hope I am not duplicating a post. I have searched and not been able to find the answer to my problem. My tv was displaying a blue stripped screen for some time and now when I turn it on the set works great for approx. 1 minute and then I loose the video completely . I had a repair guy out and he did a self test and in less than 3 minutes told me I needed a blue light. Has anyone had this happen and what was the fix? Any help you can offer would be greatly appreciated.

Thanks,

Thomas

Is a 4834P the same as a 4834M. Sony parts.

Submitted by oslerspark on Sat, 11/08/2008 - 11:52

Forums: 

I have a 35"(KV 35S26) I am trying to repair. I ordered the semiconductors and they are 4834P and my originals were 4834M.  Are these parts the same? I installed them along with a new H.O.T. and 1/4 watt fusible resistor. The parts failed again and I want to ensure these parts are correct.  I had ordered these parts as part of a SONY repair kit.

ACME-101 Sony repair kit #2
2 pieces 2SC4834P
1 piece 2SC5148
1 piece 0.1 Ohm 1/2W
fusible resistor

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...