Television and Home Theater

As noticed in another thread just did a "D" board replacement in my WV 600, everything went extremely well, turned down the blue pot to get rid of radiating lines on dark scenes, flash focused and set the convergence.

Looks great with the exception of a cross hatching pattern on light scenes, for instance, Tivo lettering is white on whatever background and the edges are blurred, on closer examination there looks to be a "cross hatching" (for lack of a better description) on any light object.

Any ideas?

Thanks!

Layne Johnson

Has anyone experienced or know how to get rid of excessive background "white noise" with Sharp LC37SBu24U. Only happens with some channels and not DVD's. I'm curious if it is the TV or the broadcast.

The code is bad light bulb, but I have already changed the bulb.  It worked for two days.  Now when I turn on the set it has the blinking green for about 5-7 seconds (good).  Then it turns solid green (good).  It stays solid green for about 25 seconds then turns off.  It has code 66 which is lamp didn't turn on.  If I unplug the set for awhile then plug it back in.  The flashing green is there for about 10 seconds (good) then goes out (good).  If I check codes at that time, it is 12 which means no faults.