Television and Home Theater

Mitsubishi wt-42413

Recently when I turned on my 42" projection tv, I heard a pop and the picture did not come on. There is sound, just no picture. I took off the back and noticed that the middle tube is not glowing as the other two are when the set is on. I also noticed that when I press the on button, the middle tube flickers and then goes out, but, the other two tubes stay on with a slight glow. What do I need to replace to fix this problem?  Thanks,  Gary

Mitsubishi 62525 no picture

alright, trying to diagnose what the problem is with this tv.  Up until yesterday i had the blinking green light issue.  I replaced the capacitors and now the tv no longer blinks.  it gives me a solid green status light, no others lit.  did the repair codes and it gives me 12 which means no problem.  Problem is it still wont give me a picture on the screen.  What should i be looking at next?  i was thinking maybe i didnt get a ribbon cable seated right when putting the dm board back in, but if that was the case wouldnt it throw an error or give me the blin

Mitsubishi WD-62628 Question

The following has happened twice, starting a week ago and after replacing the original bulb with an OEM replacement, which was replaced around 3 weeks ago. TV is around 3 years old. Turning on TV, the screen displayed half image. The screen was split vertical in the middle; image looked fine on right side but on the left side was black. Basically the image was there but just half of it displaying.

Toshiba TP50H60 Convergence Still Bad after Changing ICs

He Guys,

 

I have a Toshiba  TP50H60 whoes convergence is stillout of whack even after replacing the STKs.  I assume now, the STKs are not recieving the correct signals. The Power board might beout of whack,  a transformer on there failed a continuity test.  Think thats it?

Who has the service manual for this sucker?  I can't find it anywhere!

 

Adam H

 Pensacola FL

mitsubishi WD52525 thin white lines & jumpy picture

About a year ago, my tv had the continuous flashing green light.  I replaced 6 capacitors on the PWB and 4 on the FMT.  I did not replace anything on the DM because it looked new.  The tv was almost like new until a couple of weeks ago.   

philips chassis dptv345 sound only

Not sure what model this tv is,  (sticker has been removed) inside the back cover it says 51wb?  Another sticker says 51 W Basic?  Anyway, the sound works but no video at all,  lamps not lit, no on screen display.  The main ac fuse was blown, when I replaced that the tv would come on and the sound would work but nothing else?  I found the manual for this chassis on this site and I'm beginning to work through it, but I was hoping someone on here could save me some time and point me in the right direction.

Pages

 

Connect With Techlore