Television and Home Theater

i to have this blinking green light that wont go away my mitts 52725 ive already replaced tha caps on the DM still blinking I found an issue on the power bd I think its the back board  where the ac plugs into. The fuse f9d00 when I checked it maybe 1 volt but when i take out the fuse and check it again with the fuse taken out I get a reading of 115 volts I dont get it shouldnt it read 0   and fuse labled R9A77 is hot to the touch  and plug PA  wire #8 no real reading can someone help me out with what i should look at, is there a copy of a schematic I can get.

I have a KP-57WS500 that is shutting down. My TV problems started last year with retrace lines, mostly blue. I adjusted the screen control on the Focus Block until retrace lines dissappeared. For the last while the screen would go all blue and shut down. Sometimes the TV would last for days before it happened again, but now it only lasts a few minutes and shuts down. It has 8 blinks on the LED which would suggest the flyback.

Any suggestions would be great. 

Thanks

I have a Sony Projection TV (model KP-65WS510) with a convergence problem. I tried to fix the 3D imagine by using the Flash Focus and the Manual Convergence, but the picture was still bad. After locating this site and reading numerous post, especially from Larry Dillon, regarding this problem, I order the convergence repair kit from Tv RepairKits.com. Although I'm by no means an expert at soldering I figured I could handle this task.