Television and Home Theater

Hello!! 

I have a 2001 RCA Model D52130 on a CTC211A Chassis when I plug plug it in I get no Green Light,  No sound, no Crackling sound.  Checked the buss fuse in back of the AC power plug and it is good, Checked to make sure I'm getting power from the plug, some one said it is like a 95% chance it is my Fly-Back transformer,, where is it and is it a hard replacement I have done the IC's and Pico fuses on my Mits so I'm up for the job,, HELP..

I just performed a Convergence Repair on a Sony KP-46WT500.  After re-installing everything, I plugged in and turned on.  The picture was in the middle (running from top to bottom).  The TV then turned off and won't turn back on.  The Standby button is blinking 6 times.  I unplugged tv from the outled and checked the D Board where I found I missed connecting the Red (CN 8020), Green (CN8018), and Blue (CN 8019) Horizontal Outs.  I the connected and waited about 20 minutes before plugging in and turning on.  The TV still does not turn on and the standb

I have a 2004 Philips Projection tv model number 60PP9202.  I am in the process of trying to save this tv.  I have already replaced it but cannot bring myself to throw it out or sell it.  I loooove the size picture ect...  when it works.  I was going to replace the whole deflection board to avoid other resistors and transmitters becoming defective  in the near future and needing to replace them too.  I s this a wise idea since the set HAS No Picture  and it is CHIRPPING.  I do greatly value your knowledge with my problem.  :]