I have a Mitsubishi Projection TV VS-4007R and it has been working great with a good picture. I shut TV off this morning - returned a few hours later and it will not turn on. You can hear it click on and it immediately clicks off.
Please help
I have a Mitsubishi Projection TV VS-4007R and it has been working great with a good picture. I shut TV off this morning - returned a few hours later and it will not turn on. You can hear it click on and it immediately clicks off.
Please help
i have a mitsubishi big screen tv ws65613,,,the green light keeps flashing it has been doing it for weeks now,,,can not turn on my tv....please help ...it is 3 years old
Depending on how much printed circuit board repair experience, you may be able to repair this TV set yourself. You could have a problem with the DM board with this TV set. It is the problem out of 60% of the sets with these symptoms. If you can follow directions and solder on a small printed circuit board, this is a repair for you, BUT if you have no technical or soldering experience, play it safe and call in a pro to assist you in this repair. If you think you can handle this repair, leave a response saying so and your e-mail address where you would like the directions sent for your TV set.
YES PLEASE SEND ME THE DIRECTIONS,,,TY
I never e-mailed you? I am sorry i do not have a clue what your referring to?
how am i getting your messages then....send the info here please thank you
please can yousend the info on here thank you
How do you expect me to send the INFO from here, I do not work on this site, I help people who need help, I cannot send from the site, Boy, How am I suppose to do that? LOL I need an e-mail address to send anything, It does not tell me how to send to you. It just does not work that vway. I guess if you do not want to leave an e-mail address, I cannot help you.
[email protected] would be interested in the repair info for this symptom also
thanks
Larry, I have a Mitusbishi wt-a42 with the same problem. You stated that it might be because of the DM board. Would you please send the directions for repair to: [email protected].
Thanks, Andy
I am sorry Andy, I do not have the info on this model.
Larry I also have a Mitsu WS-65713 with the blinking light. Can you send me the directions to my email address? [email protected] It sounds like this may be something that I can do to fix my TV. Thanks
macdietz, I will send that info out this morning. Good Luck
LARRY, COULD YOU EMAIL ME AT SLICKCRACKER2000@YAHOO WITH THE DM BOARD REPAIR ON THIS REPIAR? THANKS! RANDY S
Randy I will send you the information for your TV set. Good Luck with the repair.
i have a mitsubishi vs-5052 no pic just green light
could you please dend me the directions to repair the dm boards larry dillon my e-mail is [email protected] thanks domenick
Sorry, That set does not have a DM board to repair. Does the set have any sound? If not, then you have a typical Mitsubishi power supply problem. Most likely the main power supply. You will need to get the service manual and trouble shoot the power supply circuit. If you have no solid state repair experience, play it safe and call in a pro to assist you with this repair.
To whoever can advise me with this problem. I bought a WD65732 Mitsubishi rear projection TV in November of "06" and Sunday night it just turned itsef off. I unplugged it for a minute, plugged it back in, and the tv came back on, and I finished watching the basketball game. Ahh, but the next morning when I went to turn it back on, I received no picture, but I did have audio. Tried the unplugging it, and plugging it back in routine, but this time I got no video, and no audio. The tv sounds as if it's going to start up, I can hear the fans kick in, and the green light starts blinking, but then it just shuts itself off. I remember receiving a letter/notification about a thermal sensor issue, and that they'd (Mitsubishi) would extend my warranty an additonal two years. I called them up, and they seemed almost bored with my inquiries into what could be wrong with my set. They basically told me your SOL, unless it was actually the thermal sensor, and a service tech would have to come out to see if that was actually the problem. If not, I have to eat the $200. dollar service visit.
I spoke to the main guy, and he tried telling me to just bring it in. No big deal, it's only a 65" TV, and his shop is only 15 miles away. I explained what was going on, and his basic response was that his tech can't trouble shoot the problem in my home, so I'm a little hesitant about what to do. I've read several blogs about this very same problem, and there seems to be a lot of possiblities. My main concern is basically buying the TV twice in repair costs. And ofcourse my warranty is 6 months past the expiration. If anybody might have some good advice on how to proceed, please don't hesitate to email me at [email protected]. I'd appreciate any help anyone can give. Thanks.
Sincerely,
Kenneth Pleiss
Could you email me where to solder on the circuit board to stop my television turn on and off issue.....schematics for projection Mitsubishi VS-55707 - thanks a bunch!!!! Pam
Larry: I have the same VS 4007R problem that was posted here; ie, turn on tv, clicks on then immediately off. Could you send me the repair instructions you have sent others in regards to the DM board. Thanks, JayVee
Could you email me where to solder on the circuit board to stop my television turn on and off issue.....schematics for projection Mitsubishi VS-55707 - thanks a bunch!!!! Pam
Larry: I have the same VS 4007R problem that was posted here; ie, turn on tv, clicks on then immediately off. Could you send me the repair instructions you have sent others in regards to the DM board. Thanks, JayVee
I have a mitsubishi VS-5052. The TV used to click several times after pushing the power button, then turn on, recently though, it clicks only once when I push the power button and the TV does not turn on anymore. It does click once after I unplug and plug in the TV, but does not turn on. I think it is a power supply, can anyone help with this?
I have a VS 6043 60 inch my problem is the tv turns on then immediately turns off. Could you send me the repair instructions you have sent others in regards to this problem. Thanks, Quillo
sorry but this model does not have the capacitor problem in the DM, as there is no DM inside this beast. You will need to troubleshoot the power supply first. I do not have a manual for this set as well.
Hello - have a mitsubishi vs-6043 that turns of immediately - if these instructions apply as well could you please mail to me as well? I can solder quite well :) Thanks!!
sorry but this model does not have the capacitor problem in the DM, as there is no DM inside this beast. You will need to troubleshoot the power supply and or convergence circuits first. I I am not sure if I have any service info on this set but I just received a bunch of older Mitsubishi stuff, so I will look and see what or if I have any info for this model number. BUT I will need an E-Mail address to send you anything.Make sure you mention the model number again. Do you see a chassis number on the set anywhere?
Larry
Could you send me the info for soldering the DM Board on VS-55707
[email protected]
sorry there is no DM board in this model.
Any available repair how-to info on replacing/soldering capacitors on DM Board for a Mitsubishi WD-65732?
Pages