computer

4 posts / 0 new
Last post
eric vista
computer

i have a second computer and i put new memory in and when i start the computer it starts and

no piture and i can not here the hard drive working no lights on front panel

can somebody please tell me what the problem could be

eric vista

eesmdt
I believe it could be the

I believe it could be the memory cards are not fully seated.
Be sure the are firmly pushed down and no unusual lights inside are blinking.

I have done this before by accident I did not want to push too hard getting them in and all I had to do was pullout the cards and put them back properly.

Your second possibity is many machines require special memory depending on the manufacturer.
It can be they need also to be replaced in pairs.512 MB needs a pair of 256 MB

Good luck
Don

eric vista
hi

hi
fishintvguy
i will try the solution and will let you know

eric vista

eesmdt
Best thing to remember about

Best thing to remember about today's computers is they know what to do on their own.
Finally "Plug and Play" means just that in Win XP and beyond.
If you install more memory (very cheap now)or add a new component outside through USB 2.0 it will set it's self up.
If it comes with a CD then use it.
It will go online to get any updates then so yo can't lose.
Just have a fast internet service provider like Cable.(ISP)
I just purchased and updated a Win 2K machine to XP and 1 gig memory for $58 bucks.
Be not afraid of these things they are there for your amusement and practical use they are not the boss of you Ha Ha.

 

Connect With Techlore